Skip to product information
ZS-LRTX V2.1
$215.00
Product Dimension Drawing
Product Parameter Table
More PCIE channel splitters will be launched subsequently
All case components shipped in flat loose packaging
1 Front Side Panel
2 Rear Side Panel
3 Middle Beam Assembly
4 Fan Bracket
5 Rear Panel
6 Front Panel
7 Top Panel
8 Bottom Panel
9 Hard Drive Bracket
11 Foot Pad
12 GPU Bracket Fastener
13 Flat Silicone AC Power Cord
14 PWM Fan Extension Cable
15 Rear IO Shield
16 Dual Channel 3+4 PWM Fan Hub
A: M3×4 Small Countersunk Hex Socket Screw ×3 (Rear IO)
B: M3×5×4 Socket Cap Hex Screw ×2 (GPU Fixing Block)
C: 6#-32×5/16 Round Head Hex Socket Screw ×4 (Power Supply Fixing)
D: 6#-32×5/32 Round Head Hex Socket Screw ×9 (Middle Beam and Fan Bracket Fixing)
E: M3×4 Round Head Hex Socket Screw ×16 (Motherboard/PCIe Riser Card/Fan Hub/GPU Bracket)
F: M3×15 Clinch Stud ×8 (Built-in Fan)
G: M3×15 Double-pass Brass Standoff ×4 (2.5-inch Hard Drive Bracket)
H: M3×12 Double-pass Brass Standoff ×4 (PCIe Riser Card)
I: M3×7 Double-pass Brass Standoff ×2 (Fan Hub)
J: M3×30 Countersunk Hex Socket Screw ×8 (12025 Fan)
K: M3×6 Countersunk Hex Socket Screw ×8 (12015～12018 Fan)
L: M3×16 Small Countersunk Hex Socket Screw ×4 (Bottom Foot Pads)
M: M3×8 Small Countersunk Hex Socket Screw ×4 (Top Panel)
N: M3×5 Small Countersunk Hex Socket Screw ×22 (2.5-inch Hard Drive/PCIe Riser Card/PWM Hub)
O: Motherboard Buzzer
P: Fan Rubber Foot Pad ×4
Q: Side Panel Magnetic Sheet ×4
R: Fan Magnet ×4
S: Magnetic Sheet Fixing Glue
T: H2.0 Hex Screwdriver
----------------------------------
Installation Guide
Step 1:
Install Middle Beam Assembly (3) and Rear Panel (5) with Screws (D×2)
Install ITX Motherboard with Screws (E×4)
Install Bottom Panel (8) and Foot Pads (11) with Screws (L×2)
Note: Content in brackets means (Part Number) (Part Number×Quantity)
Note: Do not install the memory modules and CPU cooler on the motherboard temporarily, otherwise it will hinder the subsequent connection of front IO cables and power supply modular cables.
----------------------------------
Step 2:
Install PCIe Riser Card with Screws (E×2) (H×2) (N×2)
Install Dual Channel 3+4 PWM Fan Hub (16) with Screws (E×2) (I×2) (N×2)
Note: The content in parentheses represents (Part Number) (Part Number×Quantity)
Plug the PWM connectors of the two turbo fans into ports No.2 and No.3 of the FAN1 area.
Note: The fan hub is equipped with two PWM input channels. Among ports 1, 2, 3, port No.3 is the speed measurement port; among ports 4, 5, 6, 7, port No.7 serves as the speed measurement port.
Users can allocate ports and adjust fan speed control strategies according to actual needs.
----------------------------------
Step 3:
Install the power supply with screws (C×4)
Install the front panel (5) with screws (D×3)
Install the foot pads (11) with screws (L×2)
Note: The content inside the brackets indicates (Part Number) (Part Number×Quantity)
----------------------------------
Step 4:
Bend the bottom part of the GPU IO baffle metal sheet partially to avoid interference with the motherboard for normal graphics card installation. Pliers or similar tools are recommended for operation.
Graphics cards compliant with SFF Ready dimensions can be installed sideways into the case. Remove the front panel of the case if the card exceeds the size limit.
----------------------------------
Step 5:
Install GPU Bracket Fastener (12) with Screws (B×2)
Secure the graphics card with Screws (E×6)
Install PWM Fan Extension Cable (14) and Rear IO Baffle (15) with Screws (A×3)
Note: The content in parentheses stands for (Part Number) (Part Number×Quantity)
----------------------------------
Step 6:
《Note: Skip this step if no 2.5-inch hard drive is to be installed》
Install Hard Drive Bracket (9) with Screws (G×4) (N×4)
Secure two 2.5-inch hard drives with Screws (N×8)
Fix the complete hard drive bracket assembly onto Fan Bracket (4) with Screws (N×4)
《Note: Skip this step if no rear GPU fan will be installed》
Install two 12015 fans on Fan Bracket (4) with Screws (F×8) (K×8)
If installing two 12025 fans, replace Screws (K×8) with (J×8)
Mount the fan bracket onto the chassis with Screws (D×4)
Note: Contents in brackets represent (Part Number×Quantity) (Part Number)
----------------------------------
Step 7:
Finish cable management for front IO power jumpers, front Type-C cables and power supply modular cables before installing RAM modules and the CPU cooler.
---------------------------------------
Step 8:
To improve compatibility limits for CPU cooler height, an external magnetic-attached fan structure is adopted.
Grooves for mounting magnetic sheets are reserved on the rear side of the side panel, which can be affixed with the matching glue included in the accessories.
The magnetic sheets can be positioned freely within the grooves, allowing the external fan to precisely align with the heatsink fins.
A PWM power port for the fan is reserved on the rear IO backplate of the chassis.
《Note: Skip this step if you do not intend to install the external magnetic fan》
Affix magnetic sheets to the front side panel (1) using glue, accessories required: (S×1) (Q×4)
Insert fan magnets (R×4) into the four mounting holes of the external 12cm fan, then attach fan rubber foot pads (P×4).
Note: The content inside parentheses indicates (Part Number) (Part Number×Quantity)
The glue requires a 10-minute air-drying period to fully solidify.
Attach the external fan to the side panel during drying to prevent displacement of the magnetic plates.
---------------------------------------
Step 9:
If you encounter resistance when fitting the front side panel (1) and rear side panel (2), loosen the screws (D×9) connecting the middle beam assembly (3) and fan bracket (4).
This allows adjustment of the assembly gap and tightness between the front/rear panels and side panels.
Note: The content in parentheses represents (Part Number) (Part Number×Quantity)
---------------------------------------
Step 10:
Install the Top Panel (7) with Screws (M×4)
Note: The content in brackets stands for (Part Number×Quantity) (Part Number)
Congratulations! Installation completed.